Presto Work Positioners WPS User Manual

WP & WPSSeriesWork PositionersInstallation, Operationand Service ManualModel Number ___________________Serial # _________________________Date plac

9 Figure 5: Floor Lock Assembly Floor Lock Assembly Detail Item Description 1 0574 – Handle, Lock 2 N0180 – Nut, Lock Handle 3

10 Figure 7: 1000, 1500 & 2700 lb. Cylinder Figure 8: 2000 lb. Capacity Cylinder Table 2: Cylinder Components F

11 Figure 9: Work Positioner Back Plate Assembly Work Positioner Back plate Assembly Note Item#1-A & -B include 2 th

12 Item# P/N# Description Qty. 1-A 1009-003-02A Back plate and fork assembly 42” forks (forks not shown) 1 -B 1009-003-04A Back plate and fork as

13 Figure 10: DC Power Wiring Schematic UP/DOWN SWITCH P/N

14 Figure 13: AC Power Wiring Schematic Figure 14: Standard AC Power Pack Figure 15: AC Power w/ Remote Control

15 Figure 16: DC Wiring Schematic w/ Remote Control Figure 17: AC Wiring Schematic w/ Remote Control

16 Table 3: Old Style Replacement Parts* Description Part Number Used On Power Pack: A completely assembled DC motor, pump and reservoir with ma

17 Motor, AC 3/4 HP 115 Volt Motor AC, Power Cord Micro Switch For AC Motor E255N E314 E246 All Lifts All Lifts All Lifts Hand Pendant For AC Power P

18 RESTOCKING POLICY Presto Lift, Inc.’s goal is for you to be satisfied with your order. Merchandise may be returned, but returns will be subject

This manual was current at the time of printing. To obtain the latest, most updated version, please contact Presto Lifts Customer Service Department

19 RETURN MATERIALS AUTHORIZATION (RMA) PROCEDURES Although Presto Lift, Inc. is not legally obligated to issue a credit for any merchandise, the R

20 Presto Lifts Limited Warranty Policy Presto Lifts warrants all of its products against defects in the welded structural frame and, if applicable,

21

2 CONTENTS Page Section

3 SECTION 1 INTRODUCTION This manual attempts to provide all of the information necessary for the safe and proper installation, operation and maint

4 • Check for signs of damage especially to the back cabinet that houses the battery, electrical/hydraulic power pack. • Check all connections for

5 B. DAILY OPERATIONS MAINTENANCE CHECKS: 1. Battery A. Check for corroded and loose terminals. A white powder substance will be pre

6 B. Clean battery compartment area. C. Check specific gravity -- fully charged battery should read 1265. D. Check fluid level in all cells. Fill

7 Figure 1: Model WP WP Component Identification Item Description 1 Cylinder 2 Flow Control Valve 3 Chain Roller Assembly 4 Load Wheel 5 Floor lo

8 Table 1: Steering Components Steering Assembly Item and Part Numbers Item Number Description and Part Number 1 N0338 - Washer